2009 Nissan Frontier Repair and Maintenance
A guide to problems, costs, maintenance and repair for your 2009 Nissan Frontier
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
2009 Nissan Frontier ProblemsCheck Engine Light Due to Faulty Fuel Level Sensor
The fuel level sensor can fail causing erratic or inaccurate fuel gauge readings. The Check Engine Light may also illuminate. Nissan has recalled 2006 - 2008 vehicles only for this fuel gauge issue. For more information on the recall, please click here»
The Check Engine Light may illuminate due to a defective charcoal canister vent control valve. The charcoal canister is a component in the Evaporative emissions (EVAP) system. Our technicians tell us a failed vent valve will require replacement.
A whining or buzzing type noise may develop from the timing chain area caused by excess slack in the secondary timing chains. Nissan has issued a service bulletin (NTB09-128) regarding this issue. Replacement of both secondary timing chains and their tensioner shoes will be necessary to repair this concern. As part of this repair, the engine oil and filter should also be replaced.
2009 Nissan Frontier QuestionsI've heard a costly maintinence issue is about the oil pan (1 answer)
How do I get to this part they told me the air conditioner would run better.
2009 Nissan Frontier RecallsNissan Recalls 2008–2010 Vehicles with Garmin Nuvi 750 Nav Systems Due to Overheating
Nissan is recalling 2008–2010 models equipped with Garmin Nuvi 750 navigation systems because the battery may overheat, which could lead to a fire. Nissan will notify owners and Garmin technicians will replace the unit's battery and insert a spacer to prevent the problem from reoccurring. This will be performed free of charge.
Nissan is recalling certain 2004 - 2010 Titan, Armada, & QX56 vehicles. Also included are 2005 - 2010 Frontier, Xterra, and Pathfinder vehicles for faulty front and/or rear suspension lower control arms. The problem is the control arm's attaching point to the vehicle's chassis. During the manufacturing process, some control arms may contain welds that do not meet Nissan's strength specs, and if they break, it may result in loss of vehicle control, and a possible crash.
The air bag crash sensors located in the front zone may have corrosion buildup due to a high level of road salt exposure. If this happens, the sensor may become inoperative, and the air bag light will come on. If this happens, the air bags will not deploy in a collision. This recall began on January 26, 2009.