Mazda Tribute Hybrid Problems
RepairPal has identified the most common problems with the Mazda Tribute Hybrid based on complaints from actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.
The 2008-2010 Mazda Tribute Hybrid with manual temperature and fan controls may have problems with the the blower motor only blowing air on certain settings. Most commonly the fan will only run on the highest setting. This is a well documented problem, and is caused by a failing blower motor resistor.
Correcting the problem is straight forward, and requires replacement of the small resistor. The resistor is normally found behind the glove box, next to the blower motor.
If the engine is misfiring, it may be caused by a damaged wire(s) which connect the fuel injectors to the Powertrain Control Module (PCM). The damaged wire(s) can be repaired or the emission wire harness replaced. A misfire can result in a loss of engine performance and illumination of the Check Engine Light.
The DPFE (differential pressure feedback EGR) sensor tends to fail. The DPFE sensor monitors function of the EGR valve by measuring pressure changes in the exhaust gas recirculation (EGR) system. Symptoms of a failing DPFE sensor are hesitation or stumbling when driving along with illumination of the Check Engine Light.