38 points
Recent Activity

Question Asked: is there a freeze plug behind the timming chain cover
February 23, 2010, 05:59 PM
i have anit freeze going into my oil. i figured head gaskets replaced them and had the heads flux and plained they were fine put it all back together and it is still doing it. i was wondering if there is a freeze plug behind the timming chain cover that could be the problem. im putting a new motor in it but im hoping to salvage the old one thanks
Question Answered: Where is the temp coolant sensor located
February 23, 2010, 06:20 PM
it could also be one the side of one of the heads
Question Answered: cant get it to crank
February 23, 2010, 06:18 PM
you say your truck is a 1989 i think that is should be a throttle body? if it is you may have the two gas line switched up one should be in and the other a flow back which will go back to the tank hope this helped
Question Answered: Turn Signal Switch Replacement
February 23, 2010, 06:11 PM
which switch are you needing to replace the one on the outside that you move up and down to engage the turn signal if it is this one no just grip it turn and pull and it will pop out but there are some wires that are attached to it im thinking it is a short pigtail on those years so inside there is a plug that you will have to unplug. plug the new one in and push your main handle into the houseing and thats that. but if you a needing to replace the other one it is under the sterring wheel and will need special tools to do this. it you think you cant do any of this i would take it to a shop dont want to break anything else if you are going to do the outside one go slow and easy and watch how it comes out so you can get it back together right hope this helps
No activities found
No activities found
No activities found