2009 Audi TT Problems
RepairPal has identified the most common problems with the 2009 Audi TT based on complaints from actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.
Popping sounds from the rear of the vehicle may be heard moments after starting the engine, or when slowing to a stop. This noise is from the leak detection pump filling the fuel tank with air, and releasing to retest the system when it finds a fault. The sequence of faults identifying this issue are as follows:
- Succession of loud pops from rear of vehicle
- Pops go away, and fuel economy decreases
- Check engine light illuminates
- OBD trouble code P2404 and/or P0441 is stored
- Engine will not start after refueling (must crank for over 30 seconds)
- Vibration when slowing to a stop
The cause is a valve which is mounted on the front of the intake manifold, commonly called the N80 valve, or EVAP system purge valve. The valve is designed to open under specific circumstances, but a worn valve will remain open at all times, preventing the pressurization of the fuel tank.
Correction of the issue is to replace the N80 valve with the latest revision.
The flywheel for the 2006-2009 Audi TT 2.0L Turbo is a non-conventional "Dual Mass" flywheel. It is known to make light rattling noise when the engine is cold, and should subside once the engine temperature raises. If the rattle doesn't go away when the engine warms, the flywheel may have failed.
If the dual mass flywheel has failed, the only solution is to replace the flywheel.
A creaking type noise may be noted from the front suspension. Replacement of the front sway bar may be required to correct this issue.
Erratic turn signal operation can be a result of a failing turn signal flasher relay which will require replacement.