badtrouble

Rookie
43 points
Recent Activity

Question Asked: Theft light flashes real fast
May 02, 2013, 06:22 AM
car cranks but will not start
No activities found
Problem Reported: Excessive Engine Oil Consumption
February 01, 2011, 03:38 PM
<p>Vehicles equipped with the 4.6L engine may develop excessive oil consumption. Please be advised that under optimum driving conditions, using one quart of oil every 2000 miles is acceptable. This Cadillac standard applies to vehicles with less that 50,000 miles. Our technicians tell us that if you experience excessive oil consumption it may be caused by built up on the <a id="ce_10768" class="ct_selected tooltip" href="/piston-rings">piston rings</a> which restricts movement, preventing them from wiping all the oil from the cylinder walls. Oil left behind is then burned during the combustion process. There is a special ring cleaning procedure which can help this situation. The GM service bulletin number is #02-06-01-009C.</p>
Problem Reported: Misfire Due to Failed Ignition Coil
September 15, 2010, 10:08 PM
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd"> <html><body><p>An <a id="ce_84" class="ct_glossary tooltip" href="/ignition-coil">ignition coil</a> may fail causing one of the cylinders to <a id="ce_9141" class="ct_how_to tooltip" href="/misfires-and-their-causes">misfire</a>. Each of the two banks of cylinders has its own coil assembly. If one ignition coil fails the coil assembly for the corresponding cylinder bank must be replaced.</p>
Problem Reported: Power Window Regulators may Fail
September 15, 2010, 10:08 PM
<p>One or more of the <a id="ce_5600" class="ct_glossary tooltip" href="/door-window-regulator">power window regulators</a> (one in each door) may fail causing the window to fall into the door and not roll up.</p>
Problem Reported: Vacuum Brake Release Switch Can Fail
September 15, 2010, 10:05 PM
<p>The <a id="ce_143" class="ct_glossary tooltip" href="/parking-brake-shoes">parking brake</a> may not release automatically due to a failed vacuum switch or actuator. Our technicians tell us that if vacuum is supplied to the actuator when the transmission is in gear, the vacuum switch is functioning and replacing the actuator should correct this concern.</p>
No activities found
No activities found