2009 Mitsubishi Lancer Problems
RepairPal has identified the most common problems with the 2009 Mitsubishi Lancer based on complaints from actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.
It is not uncommon for the clear coat paint to develop white spots and begin peeling. In most cases Mitsubishi will not cover out of warranty repairs for this condition.
An engine overheating condition may develop due to a failed radiator cooling fan controller. The failed controller should be replaced to correct this issue.
The heating, ventilation and AC (HVAC) temperature control knob may be hard to turn. Mitsubishi Motors has released a service bulletin outlining the necessary repairs. Repairs involve installing a new air blend door lever and link, lubing the blend door track, and installing a filter on top of the blower motor housing to prevent entry of dirt and debris. If the temperature control assembly has been damaged it will require replacement also.
The crankshaft position sensor may fail causing a stalling can/or no start condition. Replacing the faulty crankshaft position sensor should correct this condition.
Erratic HVAC blower motor operation may be caused by a failed blower motor and/or blower motor resistor. Our technicians tell us that if the blower motor resistor fails the blower motor should be checked. If the blower motor fails its functional test in should be replaced along with the failed blower motor resistor.