2010 Mitsubishi Galant Problems
RepairPal has identified the most common problems with the 2010 Mitsubishi Galant as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.Refine by vehicle
The power windows may fail, often related to moisture inside the door. Affected components will need to be replaced. If possible some type of moisture protection could be added to try and prevent repeat failures.
The engine may develop a low idle or stalling condition due to a failed idle air control valve. Our technicians tell us the replacement of the faulty valve is required to correct this condition.
The crankshaft position sensor may fail causing a no start and/or stalling condition. Replacement of the failed sensor will generally corrects this concern.
One or both side airbag modules may fail resulting in illumination of the airbag warning light. Side airbag modules determined to be faulty should be replaced.
The seat belts may not properly retract due to an internal fault with the retractor mechanism. Replacement of the seat belt retractor would be required to correct this concern.
It is not uncommon for the clear coat paint on black vehicles to develop white spots and begin peeling. In most cases Mitsubishi will not cover out of warranty repairs for this condition.
The drivers power seat may not adjust properly or develop a noise issue when adjusting. This is commonly caused by a damaged drive cable which will require replacement.