1994 Isuzu Rodeo Problems
RepairPal has identified the most common problems with the 1994 Isuzu Rodeo as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.Refine by vehicle
A ticking noise may be noted from the engine valve train area. This is commonly caused by varnish build up in the hydraulic lash adjusters (HLA). Our technicians tell us that using Mobil 1 synthetic oil has been successful in cleaning the varnish deposits and quieting the lifter noise.
A worn vehicle speed sensor driven gear can cause the speedometer not to work. Replacing the worn out speed sensor should correct this concern.
A knocking noise may develop when turning the steering wheel. Our technicians tell us a repair kit for the steering column is available to correct this concern.
Rear axle seal leaks can be cause by a plugged rear differential vent. Replacing the leaking seal and clearing out the vent will fix this problem.
On certain 2WD models the front hub can leak grease. Installing a new updated gasket will repair the leak.
Fuel injector "leakdown" can cause a long crank time after the engine is warmed up. The fuel injectors need to be replaced to address this problem.
Chattering when cornering can occur when the limited slip differential fluid breaks down. Replacing the fluid will repair this issue.
Varnish build up in the engine can cause one or more hydraulic lash adjusters to stick and cause a ticking noise in the engine. The noisy hydraulic lifter will need to be located and cleaned to stop the noise.