1995 Ford Bronco Problems

RepairPal has identified the most common problems with the 1995 Ford Bronco as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Refine by vehicle
×
Choose your vehicle
7
Known Problems

Vacuum hose failure is common due to engine heat and time.  Vacuum hoses are made of plastic.

Failure is very common in the ignition module, causing intermittent stalling or a "No start" condition.

Tubes for the EGR system (exhaust gas recirculation) can break, causing an exhaust leak and noise under the hood.

The upper intake manifold gasket may fail, causing an engine vacuum leak and a high idle condition. A damaged intake gasket should be replaced.

If a noise from the rear end is heard when going around turns or after driving at highway speed for an extended period, this could be caused by a failing deferential clutch kit. An updated differential clutch kit available.

If there is a vibration or noise at highway speed, it could be from the front driveshaft and may require replacement of the double cardan joint. A double cardan joint is a type of driveshaft joint that uses two universal joints.

Rough or unstable idling could be caused by the idle control valve and throttle plate being plugged with carbon.