2011 Dodge Charger Problems

RepairPal has identified the most common problems with the 2011 Dodge Charger as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Refine by vehicle
×
Choose your vehicle
11
Known Problems

Software updates are available which may correct various electrical problems with the interior features and lighting.

If you experience rough shift and/or shuddering during gear shifting, software updates to the powertrain control and transmission control modules (PCM and TCM) are available which may address these problems. On higher mileage vehicles, a mechanical failure may exhibit similar symptoms. Proper diagnoses should be performed before any repairs or software upgrades are attempted.

Some vehicles may develop a musty odor coming from the HVAC system, Dodge has issued a cleaner/disinfectant and a coating for the evaporator designed to inhibit bacterial growth.

The thermostat may fail to close completely, causing the Check Engine Light to illuminate. This problem will prevent the engine from reaching normal operating temperature; a new thermostat should be installed.

A harsh 4-3 downshift or other shift quality issues may develop. Revised transmission control module (TCM) software has been released to address these concerns.

One or more of the power windows may become inoperative, it is commonly caused by failure of the window motor or a cable in the window regulator. The window motor & regulator may need to be replaced as assembly.

A squeak may be heard from the base of the steering column while turning the steering wheel. The noise may be coming from the lower seal on the steering shaft. Lubrication of the seal will commonly correct this problem.

The fuel tank may become hard to fill and/or the fuel fill nozzle may shut off repeatedly while fueling. Our technicians tell us that various items including the fuel tank, vapor recirculation tube, fuel fill tube, or EVAP system canister control valve may be at fault. Proper diagnoses will be required to determine the exact cause of this concern.

On vehicles equipped with V6 engines, the Check Engine Light may illuminate and code P0339 is stored for intermittent loss of the crankshaft position sensor signal. Our technicians tell us that adding a shim to the crankshaft sensor will commonly correct this issue but in some cases the flex plate may require replacement.

A slight vibration in the steering wheel may be noted at freeway speeds. Our technicians tell us removing the assembly retainers on the brake rotors/drums and reinstalling the wheels can correct this issue.