2007 Dodge Caravan Problem Reports

Most Reported 2007 Dodge Caravan Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

One or more power windows may stop working due to a failed window motor or regulator. In some cases these items are replaced as a set. If not, diagnoses will be required to determine which is at fault.

Due to the crankshaft end play being out of specification, the front crankshaft seal can be popped or pushed out. Revised crank main thrust bearings will solve the problem.

Some vehicles may develop a musty odor coming from the HVAC system, Dodge has issued a cleaner/disinfectant and a coating for the evaporator designed to inhibit bacterial growth.

There have been reports of premature head gasket failure; an updated gasket design is available to correct this problem.

The front legs for the third row bench seat may not retract. Our technicians tells us a new parts kit and/or spring is available to correct this concern.

One or more power windows may stop working due to a failed regulator or motor which will require replacement. Our technicians tell us the regulator and motor is replaced as a set on these vehicles.

The Check Engine Light may illuminate for many different reasons, some of which may be corrected by updating the software in the powertrain control module (PCM).

Shifting harshness and shuddering issues related to the operation of the automatic transmission have been addressed by factory service bulletins. The shuddering can feel like the vehicle is being driven over rumble strips.

If the seal is not properly lubricated, the moon roof (sunroof) can make noise.

A "tapping plate cage" on the driver side frame rail may cause a squeak or tick noise while driving, this is often misdiagnosed as a suspension problem. The tapping plate is a threaded plate which accepts one of the front sub-frame mounting bolts. The "cage" of the threaded plate may be touching the frame rail causing noise as the vehicle is driven. "Adjusting" the rear tab on the tapping plate cage so it no longer is touching the frame should eliminate this noise.