Close

2010 Audi A4 Problems

RepairPal has identified the most common problems with the 2010 Audi A4 based on complaints from actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.

Get a Repair Estimate
Guaranteed by certified locations nationwide. Learn more
RepairPal estimates are guaranteed at over 1,700 quality certified locations nationwide. Learn more
7
Known Problems

Vacuum leaks, oxygen sensor failure, and catalytic converter efficiency faults can cause the Check Engine Light to illuminate.

2.0L turbo charged engines may develop a hesitation on acceleration and/or illumination of the Check Engine Light due to a failed high pressure fuel pump or a worn camshaft follower or camshaft. Our technicians tell us that whenever the high pressure fuel pump is replaced the camshaft and the follower should be checked for wear. The camshaft lobe pushes on the follower to operate the high pressure fuel pump. Frequent inspection of the cam and high pressure fuel pump can prevent cam failure.

Engine oil leaks are common from the valve cover gaskets and camshaft chain tensioner gasket.

The 2006-2017 Audi A4 uses the 2.0FSI, 2.0TFSI, and 3.2FSI direct injection engines. These engines are subject to carbon buildup in the intake system which can cause power loss, OBD codes and a check engine light, and a rough idle. In normal engines, the engine is cleaned by the gasoline flowing through the injectors and into the intake system, however, the A4 uses direct injection so gasoline does not flow through common carbon buildup areas. 

Possible trouble codes include: P0300P0301P0302P0303P0304, P0305, P0306.

The solution is to remove the intake manifold and professionally clean the intake manifold, intake ports on the cylinder head, and the intake valves. This may need to be done in as few as 20,000 miles. 

Clogged drains can allow rainwater to accumulate in the plenum tray (at the base of the windshield). The water may leak into the vehicle's interior, brake booster, or electrical components, which can lead to major problems. Our technicians recommend keeping the tray clear of leaves, pine needles, and other debris.

Premature wear in various multi-link suspension components can cause noises that are difficult to diagnose. Worn suspension parts can also cause uneven tire wear and create steering alignment problems.