Audi Allroad Quattro Problems
RepairPal has identified the most common problems with the Audi Allroad Quattro as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.Refine by vehicle
The 2013-2017 Audi Allroad uses the 2.0TFSI direct injection engine. This engine is subject to carbon buildup in the intake system which can cause power loss, OBD codes and a check engine light, and a rough idle. In normal engines, the engine is cleaned by the gasoline flowing through the injectors and into the intake system, however, the Allroad uses direct injection so gasoline does not flow through common carbon buildup areas.
The solution is to remove the intake manifold and professionally clean the intake manifold, intake ports on the cylinder head, and the intake valves. This may need to be done in as few as 20,000 miles.
Clogged drains can allow rainwater to accumulate in the plenum tray (at the base of the windshield). The water may leak into the vehicle's interior, brake booster, or electrical components, which can lead to major problems. Our technicians recommend keeping the tray clear of leaves, pine needles, and other debris.
Rear air springs (bellows) may develop leaks, which causes the air pump to run more often to maintain ride height. Our technicians recommend that leaking air springs be replaced.
The digital display portion of the instrument cluster may fail. Our technicians tell us the entire instrument cluster will need to be replaced to correct this concern.
Premature wear in various multi-link suspension components can cause noises that are difficult to diagnose. Worn suspension parts can also cause uneven tire wear and create steering alignment problems.
The anti-lock brake system (ABS) control module may fail causing the ABS light to illuminate. Failed modules should be replaced to restore ABS operation.
A fluid leak may develop from the propeller shaft seal on the rear of the transmission. Our technicians tell us that replacing the seal will commonly correct this concern.
Clogged sunroof drains can allow water to enter the interior and accumulate under the carpet where various control modules are mounted. Over time, the accumulated moisture can damage the control modules.
Erratic turn signal operation can be a result of a failing turn signal flasher relay which will require replacement.