» » »

Problems for specific Plymouth Breeze years:

Car problem reports

Report A Problem

Problem with your car? See what our experts say or submit your own.

Most reported 1998 Plymouth Breeze problems

 

Verified for the Plymouth Breeze

Spark plug tube seals fail, causing the tubes to fill with engine oil and the engine to misfire. As a result, the engine may run poorly and fuel economy can suffer.

15 Reports
Me Too

Verified for the Plymouth Breeze

There have been reports of premature head gasket failure; an updated gasket design is available to correct this problem.

15 Reports
Me Too

Verified for the Plymouth Breeze

An engine Oil leak may develop at the cam sensor o-ring seal. Our technicians tell us this is often misdiagnosed as an external head gasket leak.

12 Reports
Me Too

Verified for the Plymouth Breeze

The automatic transmission used in these vehicles have had a high failure rate. Failures can be due to internal component or electrical component failure.

10 Reports
Me Too

Verified for the Plymouth Breeze

When a no start condition is caused by a faulty camshaft or crankshaft sensor, related fault codes stored in the powertrain control module (PCM) should not be trusted. Our technicians tell us that under certain conditions a fault code can be stored for the "good" sensor. Care should be taken to properly diagnose this condition.

6 Reports
Me Too

Verified for the Plymouth Breeze

Some vehicles may develop a musty odor coming from the HVAC system, Dodge has issued a cleaner/disinfectant and a coating for the evaporator designed to inhibit bacterial growth.

6 Reports
Me Too

Verified for the Plymouth Breeze

One or both windshield washer nozzles may plug or clog. There are revised washer nozzles available which are more resistant to plugging.

6 Reports
Me Too

Verified for the Plymouth Breeze

Defective speed sensors on the transmission can cause problems with the cruise control and speedometer operation, as well as erratic shifting. The connectors on the sensors can corrode and/or the connector terminals can spread (poor connection), which will create similar symptoms. Any of these problems can cause Check Engine Light illumination.

 

6 Reports
Me Too

Verified for the Plymouth Breeze

If a Check Engine Light illuminates indicating leak detection pump (LDP) failure, the cause is often pinched or disconnected vacuum lines to the pump. Vacuum lines should be inspected before replacing the leak detection pump. Contamination (carbon or debris) in the pump can cause failure and any hoses should be cleared before a new pump is installed.

4 Reports
Me Too
Ask a Question