The high pressure power steering hose will commonly leak fluid; it should be replaced.
Car problem reports
Problem with your car? See what our experts say or submit your own.
Most reported 2000 Oldsmobile Intrigue problems
The fuel pump may fail causing engine to stall and not restart.
The transmission pressure control solenoid may fail causing erratic shifting. Our technicians tell us that partial dis-assembly of the transmission is necessary to replace a failed pressure control solenoid.
The engine may start and stall with the security light flashing. This is commonly caused by a failed passlock sensor which is part of the ignition lock cylinder. A secondary cause could be the ignition switch itself. Worn contacts inside the ignition switch can cause voltage drop issues which can affect the passlock system. Proper diagnoses should be performed before replacing any parts.
One or more of the power windows may stop working due to a failed window switch. Failed switches will require replacement.
The crankshaft position sensor, ignition module, and/or powertrain control module (PCM) may fail resulting in illumination of the Check Engine Light with ignition system related fault codes stored in the PCM. Patience is necessary when dealing with this specific situation as normal diagnostic procedures are not effective. In many cases, the best option is to replace parts, one at a time until the fault is corrected.
The steering may develop a clunk type noise from the upper intermediate steering shaft. Our technicians tell us that you should check with your local GM dealer to find out what the latest repair is for this condition.