1991 Mazda MPV Problems
RepairPal has identified the most common problems with the 1991 Mazda MPV as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.Refine by vehicle
If the engine cranks but won't start, the fault may be internal to the distributor. Diagnosis will show no spark and trouble codes for the crankshaft position sensor (CKP) or the camshaft position sensor (CMP). Our technicians recommend replacement of the complete distributor assembly if these conditions occur.
If a rumbling noise is heard from the engine, along with a possible loss in power, it may be caused by a collapsed hydraulic timing belt tensioner creating excessive cam backlash. Our technicians recommend replacing the timing belt and water pump at the same time, if they have not been recently replaced.
A loud ticking noise (hydraulic valve lifter noise) may be heard from the top of the engine, particularly when the engine is still cold. The noise may occur more frequently on higher mileage vehicles; Hydraulic valve lash adjusters may need to be replaced to correct this issue. Following the maintenance schedule for oil changes will also help prevent a recurrence of the noise.
If the engine will not crank when the vehicle is parked on an incline, the transmission linkage may need adjustment. Some diagnosis is required because this may also be caused by inhibitor switch failure. The inhibitor switch tells the computer that the transmission is in "Park" or "Neutral", and allows the engine to start. If the inhibitor switch has failed, it will need to be replaced along with the "manual plate". Our technicians recommend checking with Mazda for updated parts.