2010 Lincoln Town Car Problem Reports

Most Reported 2010 Lincoln Town Car Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

Sagging suspension can be a result of air suspension struts and/or drier leaking air. These type of air leaks can lead to failure of the air suspension compressor.

Check the battery cable ends frequently for corrosion. Corrosion can easily migrate under the cable insulation and cause numerous electrical faults and drivability issues.

Erratic engine coolant temperature or intermittent overheating can be caused by corrosion inside the water pump. The impeller may spin on the water pump shaft or the impeller may corrode. Either condition reduces coolant circulation resulting in engine overheating.

 

Prior to jacking or lifting a vehicle with air suspension, you must turn off the suspension switch. The switch is generally located in the trunk or on the right side of the passenger foot well.

Do not use air filters with oil-coated elements. They may cause premature failure of the mass air flow sensor; this is not covered under the warranty.

Vibration caused by the air compressor for the air suspension can be solved by installing an insulator kit at the air compressor mounting points.

Checking and adjusting the AC compressor clutch air gap can extend the service life of the AC compressor.

Even though the manufacturer does not call for regular servicing, our technicians recommend servicing the power steering fluid regularly.

When replacing the battery, make sure the battery height is correct; a battery that is too tall can cause a short circuit when the hood is closed.