1999 Dodge Ram Van 1500 Problems
RepairPal has identified the most common problems with the 1999 Dodge Ram Van 1500 based on complaints from actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.
The instrument cluster may work erratically at times. Our technicians tell us that the fault is commonly due to connection issues at the cluster electrical connector. There is a kit available to repair the connector and terminals.
The AC/heater (HVAC) system may unexpectedly switch to the defrost mode when accelerating. This system is operated by engine vacuum and should be inspected for any vacuum leaks if this problem develops. There is also a revised vacuum check valve available to address this concern.
An intermittent connection in the crank position sensor wire connector can cause poor engine performance or the engine may crank but not start.
Leak detection pump failure can be caused by the internal diaphragm switch sticking, or in some cases, contamination from debris or carbon particles from vapor canister. If black carbon particles are present in the LDP, replace vapor canister in addition to LDP. The purge solenoid should also be checked for debris or carbon contamination and replaced as necessary. All evap system hoses are subject to cracking and splitting causing leaks, Inspect hoses carefully. In cases of contamination from carbon particles or debris, all hoses and tubes must be blown out with compressed air to remove contaminates.
On 3.9L V6 and 5.9L V8 engines, the intake manifold gasket may leak and cause increased oil consumption and a spark knock during acceleration; the gasket should be replaced.