Problems with anti-theft systems using the raised-chip key can prevent the car from starting. The wires in the steering column to the ignition lock cylinder tend to break. The key and ignition lock cylinder should be replaced to correct this condition.
Problems for specific Cadillac Eldorado years:
Car problem reports
Problem with your car? See what our experts say or submit your own.
Most reported 1995 Cadillac Eldorado problems
The trunk pull down switch may fail causing the trunk lid not to close completely. Our technicians tell us that the failed switch can be replaced without changing the complete pull down motor assembly.
The engine may develop an oil leak from the lower crankcase portion of the engine block. Our technicians tell us that the engine must be removed from the vehicle to properly repair this oil leak.
The air conditioning system can be prone to refrigerant leaks and failure of one or more pressure sensors. The AC pressure sensors should be checked for proper operation when ever the AC system is serviced.
The auto level ride compressor may fail causing the rear of the vehicle to ride to high or too low.
The head light switch may fail causing the head lights to become inoperative.
The vacuum release actuator for the parking brake may fail, preventing the parking brake from releasing automatically. Our technicians remind us that there is a mechanical release lever on the park brake ratchet you may use if the park brake does not release automatically. (Care should be taken when manually releasing the park brake!)
The high pressure power steering hose will commonly leak fluid; it should be replaced.
An automatic transmission fluid leak may develop from the rubber section of a transmission cooler line. In some cases the rubber section of hose can be replaced. In others, the complete cooler line must be replaced to correct this type of leak.
An intake manifold vacuum leak can develop from a variety of sources, often causing illumination of the Check Engine Light with codes P0171 & P0174 stored. Thorough diagnoses will be necessary to pinpoint the cause in order to make the correct repairs. A "smoke" machine is often used to isolate the cause of difficult to find vacuum leaks.