2009 BMW 750Li Problem Reports

Most Reported 2009 BMW 750Li Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

There are reports of various interior trim parts peeling including center console buttons, storage tray buttons, door sill entry covers, b-pillar trims, and kick panels.

The front thrust rod bushingsalso referred to as tension strut bushingsare known to fail occasionally. The oil-filled rubber mounts weaken and crack over time, causing a mushy road feel and shuddering in the steering wheel when going over bumps.

drive train malfunction, drive moderately, maximum output not available. multiple cylinders reported misfires and dangerous exhaust gasses after startup and during moderate acceleration at 1800-2200 rpm. black smoke from exhaust during acceleration. After replacing plugs and testing coils the problem was narrowed to injectors. using scan tool to look at rough running values of various cylinders we were able to narrow problem down to cylinder 7...

Engine hydrolocked secondary to an injector failing. The car had been sputtering a little. BMW dealer in Indianapolis replace the low pressure fuel sensor. The next day the car was started and still had a sputter. No error codes. The injector allowed fuel to pour into a cylinder at 1600 psi. since fluid does not compress the rod and piston took the blow resulting in a bent rod and a knock. The knock was coming from the bottom of the piston hit...