1990 Chrysler Town & Country Problems
RepairPal has identified the most common problems with the 1990 Chrysler Town & Country based on complaints from actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.
Due to corrosion at the pivot, the driver side window wiper may fail. The pivot must be replaced.
Often caused by rust, the temperature control lever may be difficult to move. Spray an anti-rust penetrate on the lower pivot for the lever and apply lubricant to prevent future corrosion.
Windows may not roll up or down, resulting in a "ratcheting" noise. This is often caused by the plastic ribbon gear (flex tracks) on the regulator that breaks. Flex tracks are easily replaced by removing the door trim panel.
During turning, squeaks can come from the strut area; the strut mount assembly should be replaced.
Worn seals inside the transmission may cause problems with upshifting and downshifting in automatic transmissions.
The transmission has numerous problems; symptoms can range from shuddering to completely dying. The majority of the TSBs (service bulletins) require an overhaul of the transmission. Updated internal parts are available.
AWD-equipped vehicles can show a wide range of transmission problems; usually, the wrong-sized tires are being used. Be sure that all the tires are the same and that all four are replaced at the same time. Dodge recommends tire rotation every 7,500 miles.