Close
won't starrt
1999 Chevrolet S10

Won't starrt

(1999 Chevrolet S10)
engine turns over but won't start. Fuel pump is working. It died while driving then would not restart. Has no catalytic converter.
in Norman, OK on December 06, 2009
Ask a Question
1 answer & 0 comments
Popular Answer
An engine needs three basic things to start, mechanical integrity (the engine's components must be in synchronization with each other and the engine must be able to develop compression), the engine must get fuel injected into the cylinders (fuel must be injected into the engine ( there is a computer that takes inputs from many sensors on the engine, interprets these signals and decides when and how much fuel to inject into each cylinder) finally the engine needs spark to ignite the fuel injected into the engine, (the spark is also controlled by the vehicle's computer deciding when the spark arrive at the spark plug). If the components in the engine are not in synchronization due to a broken or "slipped" timing belt or chain the engine will not develop adequate compression to start and run properly. If any engine sensor has failed (crank angle sensor, camshaft position sensor, intake manifold pressure senor/air flow meter, coolant temperature sensor) any of these will cause the engine to fail to start by causing a loss of spark or fuel delivery. All these components need electricity to function, a failed fuse, relay, open or shorted electrical circuit could cause the computer, fuel pump or ignition system not to function. Unfortunately there are too many things that could cause your engine not to start to be able to pin point anything to specifically look for. Check for fuel and spark first.
Sign in to reply
General Diagnosis
$88 - $111 Learn More
An engine needs three basic things to start, mechanical integrity (the engine's components must be in synchronization with each other and the engine must be able to develop compression), the engine must get fuel injected into the cylinders (fuel must be injected into the engine ( there is a computer that takes inputs from many sensors on the engine, interprets these signals and decides when and how much fuel to inject into each cylinder) finally the engine needs spark to ignite the fuel injected into the engine, (the spark is also controlled by the vehicle's computer deciding when the spark arrive at the spark plug). If the components in the engine are not in synchronization due to a broken or "slipped" timing belt or chain the engine will not develop adequate compression to start and run properly. If any engine sensor has failed (crank angle sensor, camshaft position sensor, intake manifold pressure senor/air flow meter, coolant temperature sensor) any of these will cause the engine to fail to start by causing a loss of spark or fuel delivery. All these components need electricity to function, a failed fuse, relay, open or shorted electrical circuit could cause the computer, fuel pump or ignition system not to function. Unfortunately there are too many things that could cause your engine not to start to be able to pin point anything to specifically look for. Check for fuel and spark first.
Sign in to reply

Similar Questions

View answers to similar questions from RepairPal's community of auto experts and enthusiasts.
Hey! my car won't start. it doesn;t have sparks. i've changed the distributor.i put a brend new one. now it starrts...