Car Recalls

Volkswagen Golf TDI recall 07V442000

Incorrect Location for Headlamp Aiming Screw Disabling Cap
Electrical & Lights, October 31, 2007

RepairPal Expert Overview

Caps to disable the headlight aiming screws may be installed at the incorrect locations. Improperly aimed headlights could cause reduced road visibility, increasing the risk of a crash.


This could be considered a medium priority recall; this would change to high if attempts have been made to adjust the headlights. Please contact your Volkswagen dealer. They will check to see if your specific vehicle is affected and advise you on what to do next. Always have your vehicle identification number (VIN) handy when you call.


The caps to disable the headlight aiming screws may be installed in the incorrect positions. The cap for the horizontal aiming screw may have been installed on the vertical aiming screw. Improperly aimed headlights could cause reduced road visibility, increasing the risk of a crash. Dealers will install and remove disabling caps as necessary to assure they are in their correct locations. This recall is expected to begin on October 31, 2007. The Volkswagen recall number is Q8.

Original Recall from the NHTSA

Model Year(s): 2006, 2007

Mfr's Report Date:
October 31, 2007

NHTSA CAMPAIGN ID Number: 07V442000

NHTSA Action Number: N/A

Component: EXTERIOR LIGHTING:HEADLIGHTS

Potential Number of Units Affected: 340000

Summary: CERTAIN VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." SOME VEHICLES MAY NOT HAVE HAD A REQUIRED CAP INSTALLED WHICH DISABLES THE HEADLIGHT HORIZONTAL AIM AND SOME VEHICLES MAY CONTAIN A CAP THAT DISABLES THE VERTICAL AIMING SCREW.

Consequence: NONCOMPLIANCE CAN INHIBIT PROPER HEADLAMP AIM ADJUSTMENT FOR ROADWAY ILLUMINATION, IMPROPERLY AIMED HEADLAMPS COULD CAUSE REDUCED ROAD VISIBILITY, INCREASING THE RISK OF A CRASH.

Remedy: DEALERS WILL INSPECT FOR THE PRESENCE OF A CAP IN THE SOCKET OF THE LOW BEAM HORIZONTAL AIMING SCREW AND INSTALL ONE IF MISSING, AND INSPECT FOR THE PRESENCE OF A CAP IN THE SOCKET OF THE VERTICAL AIMING SCREW AND IF PRESENT, THE CAP WILL BE REMOVED. THE RECALL WILL BEGIN ON OCTOBER 31, 2007. OWNERS MAY CONTACT VW AT 1-800-822-8987.

Notes: VOLKSWAGEN RECALL NO. Q8.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.

Recall data provided by the National Highway Traffic Safety Administration

Ask a Question