2011 Toyota Venza Recalls

(RepairPal Expert Overview)

Southeast Toyota is recalling certain vehicles because the seat heater element may become damaged as a result of compression of the seat cushion. The damaged element could short causing burning of the seat cushion, increasing the risk of personal injury. Dealers will disconnect seat heaters with copper strand elements and refund the purchase price of the seat heater accessory to correct this concern.

(RepairPal Expert Overview)

Vehicles have a tire size/weight rating label to inform owners of the carrying capacity of their vehicle. These models are being recalled because the incorrect vehicle weight rating is shown on the information label. This could result in vehicle and tire overloading, increasing the risk of tire failure. Owners will be provided an updated vehicle weight label to correct this concern.

(RepairPal Expert Overview)

Vehicles that have had accessories added to the seats such as seat heaters, seat covers or DVD headrests may not have the occupant sensor system of the passenger seat calibrated properly. This can affect passenger air bag operation in a crash. Dealers will test the sensitivity of the occupant detection sensors and recalibrate them as necessary free of charge to resolve the concern.

(RepairPal Expert Overview)

During assembly, the electrical contacts of the stop lamp switch may have been contaminated with silicone grease, causing increased electrical resistance in the switch. This could result in: Illumination of warning lamps; a no start condition; the shift lever may not shift from the Park position; and/or inoperative brake lights. Inoperative brake lights would fail to warn other drivers the vehicle is slowing or stopping, increasing the risk of a crash. Dealers will replace the brake light switch to correct this concern.

(RepairPal Expert Overview)

50 vehicles may have been assembled with a right front drive axle that may break due to insufficient heat treatment during the manufacturing process. If the drive axle were to break the vehicle would lose power, increasing the risk of a crash. Dealers will inspect the drive shaft and replace those that may not have been manufactured correctly. This recall is expected to begin during mid June 2011.

 

Related Content