Close
Car Questions
RepairPal is your advocate for car care advice and guidance

Reset Oil Change Light

(2010 Ford Explorer)
in Morgantown, WV on November 04, 2010
Does anyone know the steps for reseting the oil change light
Displaying 1 answers & 1 comments
Popular Answer
on November 04, 2010
This is all in your Owners Manual. You know that book in the glove box no one ever reads. It's on pg. 34 I think.
To reset the oil monitoring system to 100% after each oil change
(approximately 7,500 miles [12,000 km] or six months) perform the
following:
1. Press and hold the SELECT/RESET stem for more than two seconds.
Oil life is set to 100% and OIL LIFE SET TO 100% is displayed.
Note: To change oil life 100% miles value from 7,500 miles (12,000 km)
or six months to another value, proceed to Step 3.
2. Once OIL LIFE SET TO 100% is displayed, release, press and hold the
SELECT/RESET stem for more than two seconds to change the oil life
start value. Each release, press and hold will reduce the value by 10%.
3. After setting the oil life start value, press the SELECT/RESET stem
for the next setup menu item or wait for more than four seconds to
return to the info menu.
Note: Oil Life Start Value of 100% equals 7,500 miles (12,000 km) or six
months. For example, setting oil life start value to 60% sets the oil life
start value to 3,000 miles (4,800 km) and 120 days.
on May 24, 2012
Is the Select/Reset stem the same as the reset button?
RepairPal estimates are guaranteed at over 2,000 quality certified locations nationwide. Learn more

Similar Questions

View answers to similar questions from RepairPal's community of auto experts and enthusiasts.
I know there is fairly fresh oil in it, so this is more of a nuisance than anything. LOW FUEL also comes on shortly a...
Got the oil changed they forgot to reset for oil change. On the way home engine light came on and drive light flashin...
Didn't find what you were looking for?