Close
Replaced fuel pump and filter and gas gauge still doesn't work ?
1999 Chevrolet Malibu

Replaced fuel pump and filter and gas gauge still doesn't work ?

(1999 Chevrolet Malibu)
What else could it be ?
2 answers & 3 comments
Popular Answer
on August 20, 2015
Did the scan test of the instrument cluster reveal that the problem was indeed in the pump module? .. Also did the same scan test show the guage to be working ok?.. These items were tested, right?
Sign in to reply
General Diagnosis
$88 - $111 Learn More
on August 20, 2015
Did the scan test of the instrument cluster reveal that the problem was indeed in the pump module? .. Also did the same scan test show the guage to be working ok?.. These items were tested, right?
Sign in to reply
on August 20, 2015
did you install the assembly exactly as the old one came out?sender/float arm in same exact place as the old one?
Sign in to reply
on August 20, 2015
on August 20, 2015
if it's got a digital odometer,then push it in and hold it in,turn key to on,NOT START.when you turn key to on,let go of the odometer button and tests will begin.all the gauges should sweep.you can push the button to forward through all the tests.once you turn the key back off,all returns to normal.
on August 20, 2015
OK we did all steps exactly like you stated and the Odom only switches between the miles and the trip, no test but my gauge does work just not properly.

Similar Questions

View answers to similar questions from RepairPal's community of auto experts and enthusiasts.
I do not have spark. i do have fuel. replaced crank shaft sensor and cam sensor. replaced coil, wires and plugs.
About 4 days ago my truck wouldn't start until i smacked on the gas tank, so i replaced the fuel pump but now when...