Hyundai Problem Reports

RepairPal Verified Hyundai Problem Reports

Report A Problem
View:Most ReportedNewestRepairPal Verified

If the Check Engine Light illuminates, indicating a problem with the front oxygen sensor, but the sensor tests okay, reprogramming the engine's control computer should fix the problem. Then, the Check Engine Light will no longer falsely illuminate and the acceleration, particularly from a stopped position, will be smoother.

Due to several possible engine-related problems, the Check Engine Light may illuminate. If this occurs, reprogramming the computer that controls the engine should fix the problem.

If you have driven your car a few miles and experience a hesitation during acceleration, possibly accompanied by illumination of the Check Engine Light, the problem may be related to a defective front oxygen sensor. An updated sensor is available to correct this problem.

Engine stalling or failure to start may indicate crankshaft angle sensor failure; Hyundai issued a recall (03V030000).

If the Check Engine Light illuminates, indicating a problem with the front oxygen sensor, but the sensor tests okay, reprogramming the engine's control computer should fix the problem. Then, the Check Engine Light will no longer falsely illuminate and the acceleration, particularly from a stopped position, will be smoother.

Engine stalling or failure to start may indicate crankshaft angle sensor failure; Hyundai issued a recall.

    Parking lights not turning off intermittently or all the time. The common problem is with the cabin fuse box.  Complete replacement of the assembly is necessary to fix the problem.

A failing vapor canister purge valve may cause the Check Engine Light to illuminate. This valve is part of the evaporative (EVAP) emission control system.

A hesitation on acceleration may be noted when the engine is warm. The Check Engine Light may or may not illuminate. The is commonly caused by a faulty oxygen (O2) sensor. An undated oxygen sensor is available to correct this issue.

The crankshaft position sensor may fail, causing engine stalling or a failure to start. Replacement or the failed sensor will commonly correct this problem.

Problems with the accelerator pedal position switch may cause the Check Engine Light to illuminate; an improved switch is available to fix this problem.

A creak or tick type may be noted from the sunroof when closed. This is commonly caused by drying of the sunroof weather strip. Our technicians recommend lubing the sunroof weatherstrip with a dry silicone lube to correct this issue.

A creak or tick type may be noted from the sunroof when closed. This is commonly caused by drying of the sunroof weather strip. Our technicians recommend lubing the sunroof weatherstrip with a dry silicone lube to correct this issue.

If the automatic transmission does not shift properly and the Check Engine Light illuminates, the speed sensors in the transmission may have failed. The sensors are simple and inexpensive to replace.

If the automatic transmission does not shift properly and the Check Engine Light illuminates, the speed sensors in the transmission may have failed. The sensors are simple and inexpensive to replace.