Close

2010 Mercury Milan Questions

Get answers to your auto repair and car questions. Ask a mechanic for help and get back on the road.

Find questions for your car.
hello, I just replaced the master break cylinder in my Milan, we have bleeded the breaks 3 times and I still have not breaks. we called the dealer they said to let them drip bleed. can you give any advice. maybe ABS system? I know when we put the master cylinder on and filled the reservoir the break fluid came also right out. dealer said its normal -- I think its defective no pressure is building in the pedal
What seems to make the problem better or worse? nothing helps
How long have you had this problem? 2 weeks
Overheating and a belt is missing on a pully
The lock button to lock or unlock or trunk button to open the trunk or with the control nothing happened. Why ? Thanks
it doesn't have any indications, no lights on, was changing the air filter
need diargram and how to install info.
I have a 2010 Mercury Milan Premier (4 cylinders).

Since September 2014, I have experienced inconsistent cruise control performance: sometimes it works, sometimes it does not work.

This problem first appeared when driving in higher altitudes (1500+ feet). Now, the problem also appears at the lower altitudes (300 feet). Maybe humidity contributes to the problem. The cruiser control turns on/off okay using the on/off button. However, when the car is in motion, the cruise control does not always engage using the -/+ buttons. I know that when the car is stopped, the cruise control does not engage using the -/+ buttons; this makes sense because the cruise control can not set a speed. It is like the cruise control does not always know when the car is in motion.

Has anybody else experienced this problem? If yes, do you know the cause/resolution of the problem?
Since September 2014, I have experienced inconsistent cruise control performance: sometimes it works, sometimes it does not work.
This problem first appeared when driving in higher altitudes (1500+ feet). Now, the problem also appears at the lower altitudes (300 feet). Maybe humidity contributes to the problem. The cruiser control turns on/off okay using the on/off button. However, when the car is in motion, the cruise control does not always engage using the -/+ buttons. I know that when the car is stopped, the cruise control does not engage using the -/+ buttons; this makes sense because the cruise control can not set a speed. It is like the cruise control does not always know when the car is in motion.

Has anybody else experienced this problem? If yes, do you know the cause/resolution of the problem?
When the right signal switch is activated it will blink one time and go off. If the head lights are on high beam the right signal will stay on until you turn. Does anyone know what is causing this?
New problem, has happened after about 70 miles on the road. Once it went limp twice on same trip
I had a warning message come yesterday morning after driving one mile down the road, parked my car for the entire day at work. When I left work the warning message came on to service power steering now... and service advance trac as well. There has been no prior warnings or signs of issues present.
I just noticed the dash lights and seat heaters started flashing on and off. I heard the solenoid under the dash clicking on and off. I then noticed my headlights reflecting from the car in front of me. They were flashing on and off. When I took them off of automatic mode everything worked fine. The headlights work fine and so does everything else when the headlights are not in auto mode. What needs to be fixed or replaced? Does anyone know?
Ford changed the computer module. Did not fix the problem
When left passenger door is closed the door ajar warning comes, then quickly all of the warning come on and the displays for navigation goes black. This does not happen immediately when you close the door, it happens while driving down the road. You can stop open the passenger door and close it, everything will be good to go until next time
Its been at the dealer 4 times in one month. New rack and pinion on the first trip. Recalibrated the second trip. 3rd time the module was replaced. Now they are saying it is because the battery is low? I have NEVER had any issues with starting it but now the dealership is saying it would not start this morning. Is this possible??
Get an estimate and never overpay again
RepairPal guarantees your repair will be done right.