2012 Jeep Wrangler Recalls
The heated outside rear view mirrors may develop corrosion in the wiring connectors that supply power to them. This can cause a fire hazard. Dealers will modify these wire connectors to provide a separate power feed free of charge to resolve this concern.
The power steering system and automatic transmission each have associated fluid lines. 2012 & 2013 Wrangler models equipped with both of these options are being recalled because a power steering fluid line can rub on one of the transmission oil cooler lines and wear a hole in the transmission line, causing a leak. Loss of transmission fluid can result in failure of the transmission to operate, increasing the risk of a crash. Dealers will replace the power steering return tube assembly to correct this concern.
The clockspring is a coil of wire located behind the steering wheel, it allows the steering wheel to turn and still maintain the electrical connection between the steering column and the rotating steering wheel. Certain right hand drive models are being recalled because the circuit inside the clockspring could break. This could result in illumination of the airbag warning light and/or no-deployment of the driver's front airbag in the event of a crash. Dealers will replace the clockspring and add a steering wheel dust shield to correct this concern.
Right hand drive vehicles, most often used by the Post Office, may be equipped with a steering column mounted clockspring assembly that could experience a compromised electrical circuit resulting in illumination of the airbag warning light. In the event of a crash, if the airbag warning light is illuminated, the driver's airbag may not deploy as expected. Failure of the driver's airbag to deploy increases the risk of personal injury. Dealers will perform the necessary repairs to correct this concern. The Chrysler recall number is L37.