Close

2010 GMC Sierra 2500 HD Problems

Find the most common issues based on 2010 GMC Sierra 2500 HD owner complaints.
Tap theto learn more about the most common 2010 GMC Sierra 2500 HD problems.

Most Common 2010 GMC Sierra 2500 HD Problems

The 4WD transfer case encoder motor position sensor or the selector switch may fail causing the service 4WD message to be displayed. Fault code(s) stored in the transfer case control module will ...
Illumination of the Check Engine Light can be caused by a loose or worn gas cap.
The GMC Sierra 2500 HD uses a throttle position sensor (TPS) which commonly fails and causes: Check engine light illumination Reduced Power message OBD trouble code P2135 This issue is rela...
Get a Repair Estimate
Guaranteed by certified locations nationwide. Learn more
RepairPal estimates are guaranteed at over 1,700 quality certified locations nationwide. Learn more

Common 2010 GMC Sierra 2500 HD Repair Estimates

Looking for a particular 2010 GMC Sierra 2500 HD problem?

0 Known 2010 GMC Sierra 2500 HD Brakes Problems

2 Known 2010 GMC Sierra 2500 HD Drive Train Problems

The 4WD transfer case encoder motor position sensor or the selector switch may fail causing the service 4WD message to be displayed. Fault code(s) stored in the transfer case control module will ...
Our technicians highly recommend that the transmission is serviced every 30,000 miles to avoid problems and maintain optimal operating order.

0 Known 2010 GMC Sierra 2500 HD Electrical & Lights Problems

3 Known 2010 GMC Sierra 2500 HD Engine Problems

The GMC Sierra 2500 HD uses a throttle position sensor (TPS) which commonly fails and causes: Check engine light illumination Reduced Power message OBD trouble code P2135 This issue is rela...
The fuel pump may fail causing the engine to stall and not restart.
Gas engines onlyThe spark plugs should be replaced every 100,000 miles. Our technicians recommend replacing the spark plug wires also at this time.

1 Known 2010 GMC Sierra 2500 HD Exhaust & Emissions Problem

Illumination of the Check Engine Light can be caused by a loose or worn gas cap.

1 Known 2010 GMC Sierra 2500 HD Heating & Air Conditioning Problem

Extended life coolant may become contaminated and require cooling system service before the recommended 100,000 miles.

0 Known 2010 GMC Sierra 2500 HD Maintenance Problems

1 Known 2010 GMC Sierra 2500 HD Miscellaneous Problem

Our technicians recommend flushing the brake fluid every 60,000 miles. Brake fluid that is dirty may cause problems in the brake system.

0 Known 2010 GMC Sierra 2500 HD Suspension & Steering Problems

8
Known 2010 GMC Sierra 2500 HD Problems & Complaints

The 4WD transfer case encoder motor position sensor or the selector switch may fail causing the service 4WD message to be displayed. Fault code(s) stored in the transfer case control module will ...
The fuel pump may fail causing the engine to stall and not restart.
The GMC Sierra 2500 HD uses a throttle position sensor (TPS) which commonly fails and causes: Check engine light illumination Reduced Power message OBD trouble code P2135 This issue is rela...
Illumination of the Check Engine Light can be caused by a loose or worn gas cap.
Extended life coolant may become contaminated and require cooling system service before the recommended 100,000 miles.
Our technicians recommend flushing the brake fluid every 60,000 miles. Brake fluid that is dirty may cause problems in the brake system.
Our technicians highly recommend that the transmission is serviced every 30,000 miles to avoid problems and maintain optimal operating order.
Gas engines onlyThe spark plugs should be replaced every 100,000 miles. Our technicians recommend replacing the spark plug wires also at this time.
Get a Repair Estimate
Guaranteed by certified locations nationwide. Learn more
RepairPal estimates are guaranteed at over 1,700 quality certified locations nationwide. Learn more
Researching a 2010 GMC Sierra 2500 HD?
Get maintenance costs, reviews, recalls and more.