Close

2000 Ford Mustang Recalls

Get the latest 2000 Ford Mustang recall updates.

Most Recent 2000 Ford Mustang Recall

On April 19, 2001, Ford recalled 8,100 Ford Mustang. Vehicle description: passenger vehicles. if the ball joint assembly in the rear knuckle, where the lower control arm attaches, is displaced longitudinally from its installed position, it can cause higher stress levels in the knuckle casting. if this occurs, the casting could fracture, allowing the corner of the vehicle to drop, and the lower control arm could contact the inside of the rear wheel.
Not your car? Find your recalls now:

2000 Ford Mustang Recall Details

Summary on April 19, 2001
Vehicle description: passenger vehicles. if the ball joint assembly in the rear knuckle, where the lower control arm attaches, is displaced longitudinally from its installed position, it can cause higher stress levels in the knuckle casting. if this occurs, the casting could fracture, allowing the corner of the vehicle to drop, and the lower control arm could contact the inside of the rear wheel.
Summary on December 21, 2000
Vehicle description: passenger vehicles equipped with 4.6l engines. a coolant flow blockage exists at the intake manifold heater core nipple resulting in no coolant flow to the heater and, therefore, no warm air flow from the heater or windshield defroster. vehicles with this condition do not comply with the requirements of fmvss no. 103, "windshield defrosting and defogging systems."
Summary on November 28, 2000
Vehicle description: passenger vehicles equipped with manual transmissions. if a vehicle is parked with the parking brake not fully applied and not in first gear, as directed in the owner guide, and the self adjustment pawl subsequently skips one or two teeth, the vehicle could move on some grades.
Summary on October 11, 1999
Vehicle description: passenger vehicles. the seat belt retractor may have a pin shaft in the switchable elr/alr mechanism that is incorrectly formed. in some circumstances, the switching mechanism could become nonfunctional, preventing the seat belt webbing from being extracted from the retractor. it is also possible that malfunction of the mechanism could prevent the belt from being switched into the alr mode. the elr mechanism is not affected by this condition.
Get notified about future recalls
×
Created with Sketch.
You're Signed Up!
We will notify you of any recalls that affect your
Close