Drive Shaft Replacement on 1999 Dodge Durango

Today the yoke, the joint and the yoke on the drive shaft broke on our durango. Any rough estimates of how much this will cost to repair? Thanks!

by in Auburn, NE on October 01, 2009
1 answer 1 comment
ANSWER by on October 01, 2009
Removal and refitting of the drive shaft between the transmission and the rear axle is about .6 to .8 hours labor. If your shaft has broken at the u-joint it is probably cheaper to replace the shaft or buy a wrecking yard shaft and have it rebuilt/rebalanced. Do a local search (Google driveshaft rebuilder), it is a straight forward replacement once you have the part if you are mechanically inclined.
COMMENT by on October 01, 2009
It is broken at the u joint and we thought we would replace the whole shaft we just don't have a clue what is a "reasonable" estimate for one would be. It happened after businesses were closed and I came upon this site and thought I would see what we came up with. Thanks
Related Items:
i want to get a ball park of what it will coast to replace the drive shaft?
I have no off road driving with these vehicles. No hard driving. The steering columns on both the 98 & 06 Durangos have to be defective & Chrysler needs to pay the cost for this yet they just tell...
only when its slick. i dont hear when just in 2x4, i dont hear when i turn
Need your help, Replaced front disc brakes in Oct 2008 rotors were still ok, as was the fluid. May 2009 left front brake making an awful...
Replaced both sensors cam/shaft checked fuel power to all acc. but will not fire all relays checked and tested no spark from COP at all where do you go next ecm was replaced and still same problem....

Related Content