Close

Chevrolet Venture Recalls

Get the latest Chevrolet Venture recall updates.

Most Recent Chevrolet Venture Recall

On January 24, 2003, Chevrolet recalled 1,159,156 Chevrolet Venture. Certain passenger vehicles and mini vans have lower pinion bearings in the power rack and pinion assembly in which the retainer tabs were not crimped properly. these and some other retainers used in vehicles assembled between january 1, 1996 and october 31, 1997, could fail and permit the ball bearings to escape.
Not your car? Find your recalls now:

Chevrolet Venture Recall Details

Summary on January 24, 2003
Certain passenger vehicles and mini vans have lower pinion bearings in the power rack and pinion assembly in which the retainer tabs were not crimped properly. these and some other retainers used in vehicles assembled between january 1, 1996 and october 31, 1997, could fail and permit the ball bearings to escape.
Summary on December 16, 2002
On certain passenger, sport utility vehicles and mini vans, some of these vehicles have a passenger air bag that was manufactured without a check valve pin. an air bag without the check valve pin could produce increased pressure at the onset of the air bag deployment and reduced pressure afterward.
Summary on August 15, 2002
Certain passenger, mini vans, and sport utility vehicles have an air bag inflator on the driver's side that could fracture at a weld during a deployment.
Summary on April 10, 2002
Vehicle description: certain mini vans built with second row 50/50 split bench seats or captain's chairs, fail to comply with the requirements of fmvss no. 225, "child restraint anchorage systems." the seat latch anchor wire diameter is greater than 6.1 mm.
Summary on October 22, 2001
Vehicle description: 1997-2001 chevrolet venture, pontiac montana/transport, and oldsmobile silhouette mini vans equipped with passenger side power sliding doors that were serviced in campaign 01013 (01v-067) from april to august 2001. also 2001 chevrolet venture, pontiac montana, and oldsmobile silhouette mini vans equipped with passenger side power sliding doors assembled in january through april 2001. these vehicles have inadequate front welds. if a front weld fails, the actuator can jam in the unlatched position and, when the sliding door closes, it will not be latched.