BMW M6 Recall 12V475000
The Engine Oil Pump May Fail
On certain 2013 M series vehicles, the oil pump can fail, causing a loss of oil pressure and in some cases, the engine to stall.
BMW will notify owners of affected vehicles during October of 2012. If you experience abnormal noise from the engine, the low oil pressure warning system is active, or you don't receive notification and you feel you should have, please contact your dealer. It’s helpful to have your vehicle identification number (VIN) handy when you call.
Due to a manufacturing process error, the oil pump driveshaft could separate from the pump rotor. Separation of the pump's rotor could lead to a sudden loss of oil pressure causing the possibility of complete engine failure, resulting in an engine stall-like condition, increasing the risk of a vehicle crash. Dealers will replace the engine oil pump to correct this concern.
September 28, 2012
ENGINE AND ENGINE COOLING:ENGINE
BMW is recalling certain model year 2013 M5, M6 Coupe, and M6 Convertible vehicles, manufactured from July 19, 2012, through September 11, 2012. Due to a manufacturing process error, the tolerance between the engine oil pump's drive shaft and the pump's rotor was not within specification. As a result, the pump's driveshaft could separate from the rotor.
Separation of the pump's driveshaft from the rotor could lead to a sudden loss of oil pressure causing the possibility of complete engine failure, resulting in an engine stall-like condition, increasing the risk of a vehicle crash.
BMW will notify owners, and dealers will replace the oil pump, free of charge. The safety recall is expected to begin during October 2012. Owners may contact BMW at 1-800-525-7417.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall data provided by the National Highway Traffic Safety Administration