wont start on 2000 Mazda B2500

2000 Mazda B2500 wont start, but using starter fluid gets it going and runs fine until I shut it off. Each start up I need the starter fluid

by in Waldorf, MD on September 10, 2010
1 answer 1 comment
ANSWER by on September 11, 2010
your losing fuel rail pressure somehow.Change the filter to start with and go from there. you should check fuel injectors/fuel lines/fuel pump.I would stop using starting fluid on this motor!!! If you must use anything use carb/intake cleaner.
COMMENT by on September 13, 2010
I changed fuel filter and pump seems to be working fine, but while checking for fuel problems i realized that I am not getting spark. I'm beginning to think that maybe its in the switch, at the clutch pedal. Coils have plenty of spark once its running and I have checked all fuses. Where else should I look
Related Items:
I was driving down the rode 30-35 mph truck shut down and wont start it has fuel,the fuel pump is working and I checked the fuses all good.any ideas please help a...
The truck cranks,it wont start it has sparks. It seems all the problems are similar and changing fuel pump, crankshaft sensor...
my truck just die in the middle of the road. it will not start..fuel pump works but will not turn over..just changed spark plugs..what could be the problem??
4th time in 2 months. when the clutch is pressed, key turned, nothing happens except the dash lights and sounds . #1 sears said battery cables were loose. #2 mazda replaced terminals and soldered c...

Related Content