put key in turned on nothing tried several times still nothing then pushed down brade pedal turned on key and it started have taken this to the dealer several occasions they said they could not find anything wrong with it but it has done this on 5 or 6 times sometime the light shows psc
will not start on 2008 Ford Explorer
by cleebill in Louisville, KY on January 21, 2013
ANSWER by globalhelper on January 21, 2013
poss loose wiring under dash, i would start there.could also be shift cable is stretched out somewhat and not going all the way into part. try wiggling shifter next time it happens
ANSWER by agostov6 on January 21, 2013
Are you using a duplicate key if so. might want to try the original key. also view if the theft is flashing on the dash when key is in the on position. note most newer model cars have anti theft systems. If the original key has been lost have one made by the dealer by means of using the vin #
Starting about 3 months ago, vechicle would not start right away,but after 7-10 tries. Went out one morning to start vechicle and it started and quickly stalled out only to not start again. Replace...
Can be started by turning switch on and crossing celinoid switch,,Have replaced celinoid 3 time...
The truck would not start, battery tested weak. Replaced battery. The next day the same thing happened, turned off the auto headlights, and it started fine. Any idea where the drain might be?
Before the water pump was replaced it started afterward it turns over just dont fire up and we checked the fuel switch on the passanger side what do i do now, we also checked the fuses, please hel...
My truck will not start, the engine will crank but it wont turn over, whats wrong? I dont think that it is the battery...