truck was running great. changed air cleaner and then it wouldn't start. It will turn over but not start. i have spark coil is putting out proper voltage put in new eec relay and new fuel pump relay sprayed ether into throttle body but it still won't start. what else could it be. I.am stumped.
Ford Q&AAsk Your Question
1990 Ford F-150 Question: why won't my truck start
Answer #1G. T. Service Center (2294 Answers) , Stephenville, TX - (254) 638-3236ProfessorG January 13, 2014, 13:54Master
Did you plug everything back in, MAF ?
Answer #2pushrod January 13, 2014, 13:57Master
Pull a wire off a spark plug and check for good HOT spark there! Did you install an aftermarket air 'cleaner' or do you mean you changed the air 'filter'? IF you have spark at the plugs and sprayed ether into the intake it has got to either backfire, start for a second or catch on fire!!!! Check for SPARK!
Replyh3mster, January 14, 2014, 07:08Rookie
just changed air filter. map sensor doesn't connect to the air box have pulled all plugs and tested for spark against motor all are firing
FOLLOW UP: I found out what the problem is. my tank selector burned out and shorted my new pump relay took out switch put in a jumper put in the New relay and she started right up.
Thanks again push that's twice you helped out