i just repaired my trany after replacing back in car it will not start after cecking around i saw that the brake light would come on once the cluch was ingauged i check the wiring and i don't know why its coming on and now the car will not start. i can push start the car and it will run put to cold start it will not start please help
why my car will not start on 1990 Mazda Miata MX-5
by tjones4me in Phoenix, AZ on January 16, 2011
ANSWER by Visitor on January 16, 2011
If you can push start the car, the first place I would check is the condition of the neutral safety switch at the clutch pedal.
ANSWER by Visitor on February 10, 2011
in my 96 mazda, automatic, I had to remove the center console to replace a modulator that was connected to the shift handle. Also, this ran off the fuse link for the brake lights . When the fuse was blown for the brake lights, the car could not be moved from park to any gear
I just paid $1,500 to replace the vinyl top of my Miata. The Handbook said tops should be replaced every 8 - 10 years; my 2008 Miata top started tearing on both sides (seams splitting) in 2012. N...
For almost 3 years I've had this problem and no one has been able to troubleshoot it. My car occasionally jerks at highway speeds, and when I pull over, it knocks off. It won't start again until 20...
About 2 weeks ago, I had to jump off my car. I had the battery checked. It showed full voltage, but charging was low. Now when i start the car, the en mobilize light comes on, but does not stay on....