An indicator appeared on my screen that maintenance rqd while driving on a highway after servicing. What could be the problem
Toyota Q&AAsk Your Question
2006 Toyota Corolla Question: While driving on a highway after servicing suddenly an indicaror appeared on the
Justin Case Auto from Justin Case Automotive Repair, Inc., July 16, 2013, 03:13Technician
Maintenance required lights are an oil change light (as long as it's yellow). The shop may have just forgot to reset it. It happens. Take it back and have them double check it or...
Reset the system by the following procedure:
Turn the ignition key to the "OFF" position with the odometer reading shown.
Turn the ignition key to the "ON" position while holding down the trip meter reset knob. Hold down the knob for at least 5 seconds. Dashes will bling and slowly count down off the odometer display. Wait until the odometer indicates "000000" and the light goes off. Now you can release the trip meter reset knob.
If the system fails to reset, the light will continue flashing.
Replyhaizl, July 16, 2013, 10:13Rookie
What will happen after the odometer turns to 00000000. Will the initial reading appear again?
ReplyJustin Case Auto, July 16, 2013, 14:09Technician
It will most likely go back to the odometer #'s. Release the reset knob and start vehicle. If it's off - ok. If it's not it's not an oil change light and should be looked at by the shop.
Answer #2pushrod July 16, 2013, 03:29Master
Owners manual will tell you ALL you need to know about it!
ck owners manual