wheel bearings on 1996 Mazda B4000

do the front wheel bearing have to be pressed?

by in Crossville, TN on November 28, 2010
2 answers
ANSWER by on November 28, 2010
is it 2wheel or 4wheel i would say no
ANSWER by on November 28, 2010
Front wheel bearings in your pick up - regardless of 4x2 or 4x4 - are packed into the hub and rotor assembly - not pressed.
Related Items:
I have a B4000 SE with 4 wheel drive. When I turn the wheel too the right I hear a "gear meshing" noise, as if the 4 wheel drive is trying to engage? If I engage the 4 wheel drive the noise stops? ...
...the cost as they felt that on average this sort of work should run around $325. The issue is wheel bearings needing to be repacked and I assume races and grease seals. The bottom line is, A)Why should t...
What is the procedure & difficulty level for replacing a front wheel bearing on a 4x4?
my 94 mazda b4000 4x4 has been making noise and the wheel does move when its up on the jack how do we take the bearings off of the wheel.
When we push the four-wheel drive button, it won't go into four wheel drive. We have replaced the transfer case shift module and the transfer case motor. The module clicks when the four-wheel butto...

Related Content