ocaasionally it will shift on it own but most of the time I had to put it into neutral then back into drive..i replaced the speed sensor and the abs sensor on the rear axle still no change , then i changed the transmission filter and the fluid, after this the truck abruptly went into gear but still would not shift from first to second , the transmission level would not read (i put in the required 4 quarts) so i added one more now it revs high and will not shift at all not even if I put it into neutral , however it does fine in reverse ..im hoping i do not have to replace the transmission ..any ideas anyone..
Dodge Q&AAsk Your Question
1999 Dodge Ram 2500 Question: what to do now my truck has shifting issues revs high RPMs but will not shift
Answer #1G. T. Service Center (3112 Answers) , Stephenville, TX - (254) 638-3236ProfessorG January 02, 2014, 19:40Master
The shift solenoid is bad; There are 2 components to be replaced at the same time. If there is/was metal shavings in your fluid/pan, you would be wasting your time to replace the components alone. If shavings the transmission needs rebuilt/replaced.
Replyblondebimbo, January 03, 2014, 01:32Rookie
There were no shavings in the pan , and that was my next task to do , which I considered doing when I had the pan off because both components were right there in my face. So the shift solenoid and the tranducer? and Thank you someone told me to add more tranny fluid but I wasnt sure I should...I appreciate you help so much Professor G
ReplyProfessorG, January 03, 2014, 05:41Master
U Bet, I have had problems with shifting after replacing, but the customer demanded to just replace parts, then of course it was my fault. Have a Great Day.
Answer #2Greg's Orange Auto (12205 Answers) , Orange, CA - (714) 361-9386globalhelper January 03, 2014, 06:42Master
get a free est and complete diag from aamco. how many miles on trans?