water pump on 1996 Ford Contour

how hard is the water pnmp to change on the 4 cylinder engine

by in Ringgold, GA on June 10, 2010
2 answers
ANSWER by on June 10, 2010
This is a 3 to 4 hour job for a trained tech, Better off having a shop handle this
ANSWER by on June 10, 2010
it is very tight in the front of the motor. i agree with mr. 427, let a shop do it for you. Roy
Related Items:
...rough the engine? New thermostat, no change. No leaks. Is it possible for somethine inside the water pump to fail and cause the no water flow? The old days you could take off the radiator cap and see...
...just keeps boiling out threw the overflow hose and spilling out on the ground could it be the water pump
Looking at it from the top its under the motor so dont look like you can get to it. From the bottom its above the motor mount and looks very difficult to reach. Is it easier that I think and if so ...
...eir any seals that should be changed on this engine the same time as the belt replacement? The water pump should be changed same time as well?
I have a 1999 ford contour 4 cyl. with dual overhead cam. I took my car in to get the water pump replaced and it has taken two days for this job to be completed. How long does it take to rep...

Related Content