WATER PUMP on 1996 Buick Regal

THERE IS ONE BOLT HOLDING ON THE WATER PUMP THAT I AM HAVING A PROBLEM IN REMOVING. IT IS BEHIND THE POWER STEERING PUMP PULLEY. ANY ADVICCE?

by in Cedar Knolls, NJ on January 09, 2009
2 answers
ANSWER by on January 09, 2009
Are there holes in the pulley that would allow access to the water pump bolt? If there are no holes to allow access the bolt, you might need to remove the steering pump pulley before the pump can be removed.
ANSWER by on October 27, 2009
i had same problem but i figured it out , you need to take off the bolts to power steering pump ( 2) and after that , just move power steering pump off to the side and you will be able to reach the bolt on the water pump. - good luck , ed -
Related Items:
Is the Water pump Pully supposed to spin freely? i spent 2 hours one night trying to put the Serp Belt back on.....
The water pump may develop a coolant leak resulting in an engine overheating condition.  
...at manifold issue. The leak is in a plastic 90 degree fitting (left end where it enters the water pump housing, not the lower manifold), that is on top of the water pump housing (crank dampener end...
...would hav to have it towed to a shop i just need to no how much it would cost to fix an is th water pump ?
Im replacing my water pump and its almost out but the pully on the ps pump is blocking it. Whats the best and easiest way...