X

Volvo Recalls

Models : Volvo V70
Engine, November 16, 1998
Summary:VEHICLE DESCRIPTION: STATION WAGONS EQUIPPED WITH THIRD SEATS. USERS OF THE THIRD SEAT, WHEN EXITING THE VEHICLE, CAN COME IN CONTACT WITH THE TAILPIPE.
Models : Volvo 780
Electrical & Lights, March 6, 1998
Summary:VEHICLE DESCRIPTION: PASSENGER VEHICLES. DUE TO LIMITED SPACE AND VARIATIONS IN THE ASSEMBLY OF THE CABLES, CHAFING OF THE INSULATION OF THE CABLES FEEDING THE SEAT HEATER, POWER SEAT MOTORS AND SEAT BELT WARNING INDICATOR SITUATED UNDER THE FRONT SEAT, CAN OCCUR.
Models : Volvo 850
Engine, October 28, 1996
Summary:ENGINE BLOCK HEATERS INSTALLED AS ACCESSORIES. THE BLOCK HEATER CONTACT SURFACE DOES NOT MATCH CORRECTLY WITH THE ENGINE BLOCK AS INTENDED. THE BLOCK HEATER COULD COME LOOSE FROM THE ENGINE BLOCK, AND IF BEING USED, COULD POSSIBLY OVERHEAT CAUSING DAMAGE IF IT COMES IN CONTACT WITH OTHER ENGINE COMPARTMENT COMPONENTS.
Models : Volvo 850
Body, Interior & Misc., May 12, 1995
Summary:SOME OF THE JACKS SUPPLIED WITH THE VEHICLES DO NOT HAVE THE NECESSARY LOAD CAPACITY.
Models : Volvo 960
Body, Interior & Misc., November 16, 1994
Summary:THE DRIVER'S SIDE AIR BAG MODULE MAY NOT PROPERLY DEPLOY.
Models : Volvo 850
Drive Train, October 15, 1994
Summary:UNDER VERY COLD WEATHER CONDITIONS, ICE CRYSTALS CAN FORM AT THE THROTTLE IN THE ENGINE INTAKE SYSTEM, AND PREVENT THE THROTTLE FROM RETURNING TO IDLE.
Models : Volvo 940
Drive Train, June 3, 1993
Summary:PLASTIC HOOD INSULATION CLIP(S) WAS(WERE) INADVERTENTLY DROPPED INTO THE HOSE BETWEEN THE CHARGE AIR COOLER AND THE THROTTLE HOUSING WHICH CAN INTERFERE WITH THE THROTTLE OPERATION.
Models : Volvo 740, Volvo 760, Volvo 940
Body, Interior & Misc., May 13, 1991
Summary:SAFETY BELTS ARE DESIGNED TO BE ROUTED UNDER A DIAGONAL CROSS BRACE DURING FASTENING. THE INSTRUCTIONAL LABELS FOR THE BELT ROUTING ARE INADEQUATE, AND CAN RESULT IN INADVERTANT RELEASE OF THE BELT BUCKLE.
Models : Volvo 760, Volvo 780, Volvo 940
Engine, March 1, 1991
Summary:IF CONDITIONS OF HIGH AMBIENT TEMPERATURE, OVERFILLING OF THE FUEL TANK, AND INSUFFICIENT TORQUE ON THE SENDING UNIT LOCK RING EXIST SIMULTANEOUSLY, FUEL SEEPAGE MAY OCCUR FROM THE TOP OF THE TANK.
Models : Volvo 740
Engine, September 28, 1990
Summary:FUEL DAMPER LOCATED BEHIND THE FUEL LINE AND THE FUEL RAIL MAY BE IMPROPERLY ASSEMBLED. OVER TIME, THE SOLDER JOINTS COULD ALLOW A SMALL AMOUNT OF FUEL TO LEAK.