2003 Volvo S80 Problems
RepairPal has identified the most common problems with the 2003 Volvo S80 as reported by actual vehicle owners. We'll tell you what the problem is and what it'll take to fix it.Refine by vehicle
Front upper strut mounts may wear prematurely, resulting in loud noise from the front of the vehicle when going over bumps.
The automatic transmission may develop shifting problems and/or the Check Engine Light may illuminate due to internal component failure and/or software issues. It is always best to be sure the transmission control module has the latest software installed when any major transmission repair is performed.
Many complaints have been reported regarding Volvo S80 transmission shifting issues. Long shift times between gear shifts, hard shifting, hard downshifting and a loss of transmission operation all together to name a few.
If the issue is minor, a transmission software update may address this issue so if available, the software should be updated before any repairs are made. After a software update or repair, the shift adaptation needs to be reset. A good quality Volvo repair shop will know how to perform this task.
There are several technical service bulletins (TSB's) available from Volvo that address these shifting issues and they should be consulted by the repair shop during the automatic transmission diagnostic process.
Regular servicing of the transmission fluid can help with preventing transmission failure, but not in all cases. Follow the suggested fluid replacement interval recommended by Volvo. You will find this in your owners manual, or find it here: http://bit.ly/Volvo_Owners_Manuals
The front control arm bushings wear out, resulting in alignment issues and squeaking and/or knocking noises from the front end. Worn bushings will require replacement.
Front and/or rear sway bar end links may wear out prematurely, causing a knocking noise from the front or rear of the vehicle when driving on bumpy roads. Our technicians recommend inspecting the links at each service, they should be replaced if any looseness is found.