The brake power assist function may fail due to failure of the camshaft lobe that drives the brake vacuum pump. Dealers will repair affected vehicles free of charge (the repair procedure is not available as of the time of this writing) to resolve the concern.
The passenger seat occupant detection system may not function properly, resulting in the passenger frontal air bag not operating as it should in an accident. Dealers will replace the passenger occupant detection system control module free of charge to resolve the concern.
The driver's side air bag may not be powered due to a loss of electrical connection from the clock spring sliding contact in the steering wheel caused by contamination. Dealers will repair the vehicle free of charge.
The brake line to the left rear wheel may have been left loose during manufacturing. Dealers will tighten the brake line fitting free of charge to resolve the concern.
The vehicle certification label may list improper tire pressure and weight rating information. Dealers will correct the information on the certification label free of charge to resolve the concern.
The vehicle may fail to start, or stall while driving, due to a faulty fuel pump. The dealer will replace the fuel pump to resolve the concern.
The ignition key could turn to the off or accessory position while driving. The engine can stall and various safety components, power steering and power brakes may stop functioning. The dealer will replace the ignition switch and key FOBs free of charge to correct the problem.
The fuel rail is a tube that carries fuel to the fuel injectors. A sealing cap on the fuel rail may leak, increasing the risk of a fire. Dealers will replace the affected fuel rail to correct this concern.
A sealing cap at the fuel rail may fail, allowing fuel to leak into the engine compartment, increasing the risk of a fire. Dealers will replace the fuel rail on affected vehicles to correct this concern.
If a rear suspension trailing arm becomes bent, its durability may be compromised and it could break unexpectedly. If this were to occur vehicle control would be affected, increasing the risk of a crash. When parts become available, dealers will install a sheet metal inlay on each of the rear axle trailing arms to prevent sudden loss of vehicle control should a rear trailing arm suddenly break.