More About Points »
You may have a hole, leak, or faulty brake caliper or wheel cylinder email me for any more questions www.elstonauto.com
These plug into your fuse panel under the driver side dash. May have a pic in your manual or online
Hello, you may need parts, but this is usually a mis set chamber and caster angle.
Hello, if you cannot get ahold of the broken cable you will ned to get to the latch possiblly from under the cars front to manually move the release. www.elstonauto.com emial me if you need more help!
Hello, there are man plastic hoses for coolant now days, an you provide a pic or more info about this problem? www.elstonauto.com
Make sure the rod is slid into the booster all the way and is seating correctly. Also the pedal switch is very adjustable on these you can move the switch out and back about one inch of play to set your correct pedal travel. please contact me for more help! www.elstonauto.com
Hello there, you shoudl be able to get these at any local parts store, they are pretty cheap. THey can also look up the correct model for you. www.elstonauto.com
Hello there! Most likely you will ned a CV Joint/alxe replaced, please visit our website for a FREE estimate online! This is a smaller repair. www.elstonauto.com
Hello, the Chilton Labor Guide says this is a 10.4 hour job, to replace the entire engine assembly. So at 60 per hour, your looking around 624 labor.
Sounds like your brake switch on the top of your pedal may be malfunctioning, this is most likely and very simple.