More About Points »
Stella Niagara, NY
remove inner door panel and check to see if there is a rod off or the handle is broken !!!
It sounds like you have a blown head gasket or a stuck t stat I would start by replacing t stat and go from there.
have you taken the three flywheel bolts out of the converter?
that is a fairly big job that I wouldnt want to try at home unless you have a hoist ,but if you want you can try utube to see if they have the procedure to do it.
if it turns over check for spark and fuel pressure
is the check engine light on ? if so scan test for codes, also check for a vacuum leak
go to U tube it should have a procedure for replacing hose
your owners manual should tell you where the fuses go ,replace all missing fuses and check to see if it will start
cross your solenoid at the starter and see if will turn over providing that is what you are talking about when you say no start ,I assume you mean it wont turn over.
scan test for codes use a tech 11 scanner so you can read data stream ,also check your fuel pressure.