Rookie

Rookie

37 points

More About Points »

Upickit

Durham, NC

upickit has not written a profile yet.

Recent Activity

Questions & Answers | Problem Reports | Reviews | Comments

Question Asked: 

Cranked engine over to see if cylinders was firing with spark plug out. Cut engine off took flashlight and looked n spark plug hole and saw fuel dropping on the piston. What would cause this on #2 and#6 cylinders?


Flag This
Question Asked: 

Cranked engine over to see if cylinders was firing with spark plug out. Cut engine off took flashlight and looked n spark plug hole and saw fuel dropping on the piston. What would cause this on #2 and#6 cylinders?


Flag This
Question Asked: 

The excess gas that I was getting n my oil and coming out tailpipe was caused by broken start injector timer switch. I replaced timer and cold start injector, am not getting gas n oil anymore. Running fairly well,just getting white smoke. How long does it take to burn out?


Flag This
Question Asked: 

After pulling heads to replace valve stem seals, put heads back on with new head gaskets, intake gasket, everything assembled as should be.now its getting too much gas, smokes, and gas comes out tailpipe.I have replaced fuel pressure regulator, blown out fuel return, got gas in my oil pan.What's going on? HELP!


Flag This
Question Answered: 

Are u talking about thermostat?


Flag This
Question Answered: 

Sounds like you might have oneb or more cylinders missing.check spark plugs, wires distributor cap, rotor button.


Flag This
Question Asked: 

What does ope Ming relay have to do with fuel system?


Flag This
Question Asked: 

My gas return line was stopped up, blew it out. Gas coming out tailpipe. How do I get rid of this gas?


Flag This
Question Asked: 

After putting heads back on l'm getting too much fuel to engine


Flag This
Question Asked: 

Pulled heads to replace valve stem seals, put motor back together have loss of power


Flag This
Answer Ranks