I received the truck as a "gift" knowing I had to replace the springs and spring mounts. The truck runs GREAT The problem I am having is that the truck will not start on occassions. If I let it sit for a few hours it will start. Lately however the problem is worsening. Is this a fuel filter issue?
Truck wont start on 1994 Mazda B3000
by lenoelfers in Cleveland, OH on July 20, 2010
2 answers 1 comment
ANSWER by Superbob on September 10, 2010
Does it crank and not start or not crank? If it cranks and won't start I suspect the fuel pump relay which should be in the relay box under the hood. It'd be interesting to know whether there's spark and/or fuel pressure when you have the problem...
COMMENT by lenoelfers on September 10, 2010
I have since replace the fule filter and checked the relays. I have noticed however that if the "check engine" light does not illuminate upon turning the ignition key, the truck wont start. However when the check engine light does illumintate the truck starts right up.
ANSWER by neilsanangelo on September 23, 2010
sounds like the electronic control module to me. In my experience the vehicle will start run a while then quit. Let it sit a while and it'll start back up and run a little longer
the truck was doing fine then the next day went to turn it on to head for work and it wouldn't start at all. this is the first time it did this. i had a mechaniccheck it out and he couldn'tfind th...
the ignition turns and the lights all work bit not the starter
The last time I went to drive my truck it started up but when I went to put it into gear it wouldn't go. I have a manual transmission, no sensors are on and it drove fine less than 12 hrs earlier. ...
never gave a problem and then went to put in reverse and nothing